After this event occurred i was never able to Get output sound again.
I have the following components:
#1-Using a cheap M-audio to work as a Guitar/Microphone input.
#2-The RCA outputs were conected to 2 Gemsound Amplifiers of 1000 wats each.
#3-And on the [Left & Right] Output of this amplifier i had 2 Polk Audio Speakers connected by Normal speaker wire.
#5-Finally to control The Level and EQ i had bridge a Small Cheap Dj mixing table [Gemini 626]
Things i have tried so Far to troubleshoot this:
-I connected my headset to the audio interface and i can hear the music playing just Fine.[Working fine]
-Bypassed the mixing table completely and Connected the Speakers directly to the amplifiers [Not Working]
-Did a Straight connection by jack cable from the Headset From the audio interface to the amplifier and from the amplifier to 1 of the speakers and realized that [Not Working]
--Did a Straight connection by jack cable from the Headset From the audio interface to the amplifier and from the amplifier to My Studio monitors and realized that no output was obtained[Not Working]
So yeah...I'm tried my very best to describe the situation on here as best as i could since i noticed that this forum is also viewed by people that do Sound and all that so...Hopefully someone throws me a bone.
PS:My mixer powers up seems to be working Fine.
PS2:The amplifiers also power up the lights come on and so do the cooling Fans.
PS3 i checked the speakers and monitors and there is No damage done by the 2-3 second Feedback.
I'm at a complete loss here tried everything i could think of and still no sound.
Thanks for reading
Pedro