Q & A on technical issues concerning music equipment, electronics, sound, recording, computers, gaming, the internet, etc.
Moderators: Ron , Jim Price
MONGO
Platinum Member
Posts: 782 Joined: Sunday Sep 28, 2008
Location: Tipton
Post
by MONGO » Tuesday Sep 13, 2011
have an old crate 150 watt amp with a ev 12 inch
when i fired it up it had a loud hum and the speaker smoked.
very expensive speaker but why would that much current melt the coil in 30 seconds?
A wise man will say "nothing"
Jasaoke
Platinum Member
Posts: 504 Joined: Tuesday Jul 13, 2010
Location: Altoona
Contact:
Post
by Jasaoke » Thursday Sep 15, 2011
I think the main problem is that it says "crate" on the front. Try one that doesn't...
lonewolf
Diamond Member
Posts: 6249 Joined: Thursday Sep 25, 2003
Location: Anywhere, Earth
Contact:
Post
by lonewolf » Thursday Sep 15, 2011
was that an EVM12L?
at 200W rms rating, they are pretty hard to burn up!
The amp probably went DC on ya.
...Oh, the freedom of the day that yielded to no rule or time...
floodcitybrass
Platinum Member
Posts: 527 Joined: Thursday Jan 30, 2003
Post
by floodcitybrass » Monday Sep 19, 2011
You can blow speakers by clipping them with underpowered amps.
ToonaRockGuy
Diamond Member
Posts: 3091 Joined: Tuesday Dec 17, 2002
Location: Altoona, behind a drumset.
Post
by ToonaRockGuy » Tuesday Sep 20, 2011
Jasaoke wrote: I think the main problem is that it says "crate" on the front. Try one that doesn't...
EPIC. Jasoke FTW.
Dood...
LHSL
Gold Member
Posts: 181 Joined: Wednesday May 31, 2006
Location: Johnstown
Contact:
Post
by LHSL » Tuesday Sep 20, 2011
lonewolf wrote: was that an EVM12L?
at 200W rms rating, they are pretty hard to burn up!
The amp probably went DC on ya.
If it was humming, I doubt it was DC.
"Turn it down!"
"What?"