I am making a custom picture frame for my wreck room in my basement. Anyone know where I can get a custom piece of glass or lucite for a reasonable price?
Dimensions are 63 3/4" wide X 29 3/4" high.
Also does lucite have to be fitted tight to keep from sagging eventually under its own weight?
Help
-
Killjingle
- Diamond Member
- Posts: 1714
- Joined: Wed Dec 11, 2002 1:10 am
- Location: Elton
- Contact:
Help
Everyone wants to go to heaven but noone wants to die
-
onetooloud
- Gold Member
- Posts: 263
- Joined: Mon Aug 11, 2003 9:15 pm
- Location: Johnstown
The first place that comes into my mind would be royal plate glass in downtown Johnstown.
Anderson glass would have been a good bet in Woodvale but I don't think they are around anymore.
Your best bet might be your Pivot connection at cambria glass and insulation.
If you really want to spend low dollars you may be able to find used glass at Salvage Heaven in Vinco. I've bought plate glass there in the past for almost nothing.
Glass thickness will factor in price as well.
Lucite or plexiglass that big is going to bow or sag in time without a doubt.
Anderson glass would have been a good bet in Woodvale but I don't think they are around anymore.
Your best bet might be your Pivot connection at cambria glass and insulation.
If you really want to spend low dollars you may be able to find used glass at Salvage Heaven in Vinco. I've bought plate glass there in the past for almost nothing.
Glass thickness will factor in price as well.
Lucite or plexiglass that big is going to bow or sag in time without a doubt.
-
DrumAndDestroy
- Diamond Member
- Posts: 2373
- Joined: Mon Feb 05, 2007 5:43 pm
- Location: Altoona
- Contact:
Re: Help
do you really want fragile stuff in a wreck room?Killjingle wrote:I am making a custom picture frame for my wreck room in my basement. Anyone know where I can get a custom piece of glass or lucite for a reasonable price?
wow...i am lame!
-
killedbydeath
- Active Member
- Posts: 14
- Joined: Tue Feb 10, 2009 2:17 am